Packages

final case class Vibrato(rate: Rate, freq: GE = 440.0f, beat: GE = 6.0f, depth: GE = 0.02f, delay: GE = 0.0f, onset: GE = 0.0f, beatVar: GE = 0.04f, depthVar: GE = 0.1f, iphase: GE = 0.0f) extends SingleOut with Product with Serializable

A low frequency oscillator UGen for modelling vibrato. It produces a modulating frequency value in Hertz that can be used as the frequency parameter of another UGen.

By setting more extreme settings, one can get back to the timbres of FM synthesis. One can also add in some noise to the vibrato rate and vibrato size (modulation depth) to make for a more realistic motor pattern.

The vibrato output is a waveform based on a squared envelope shape with four stages marking out 0.0 to 1.0, 1.0 to 0.0, 0.0 to -1.0, and -1.0 back to 0.0. The vibrato rate determines how quickly one moves through these stages.

freq

fundamental frequency in Hertz. If the Vibrato UGen is running at audio rate, this must be an audio-rate input as well.

beat

vibrato rate, that is the speed of wobble in Hertz. Note that if this is set to a too low value, you may never get vibrato back, since this input is only checked at the end of a cycle.

depth

amount of vibrato frequency deviation around the fundamental, as a proportion of the fundamental.

delay

delay in seconds before vibrato is established. (init-time only)

onset

transition time in seconds from no vibrato to full vibrato after the initial delay time. (init-time only)

beatVar

random (noise) variation on the beat parameter, expressed as a proportion of beat . It can change once per cycle of vibrato.

depthVar

random (noise) variation on the depth of modulation, expressed as a proportion of depth . It can change once per cycle of vibrato. The noise affects independently the up and the down part of vibrato shape within a cycle.

iphase

initial phase of vibrato modulation, allowing starting above or below the fundamental rather than on it. (init-time only)

Linear Supertypes
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. Vibrato
  2. Serializable
  3. SingleOut
  4. SomeOut
  5. Lazy
  6. GE
  7. UGenSource
  8. Expander
  9. Lazy
  10. Product
  11. Equals
  12. AnyRef
  13. Any
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. Protected

Instance Constructors

  1. new Vibrato(rate: Rate, freq: GE = 440.0f, beat: GE = 6.0f, depth: GE = 0.02f, delay: GE = 0.0f, onset: GE = 0.0f, beatVar: GE = 0.04f, depthVar: GE = 0.1f, iphase: GE = 0.0f)

    freq

    fundamental frequency in Hertz. If the Vibrato UGen is running at audio rate, this must be an audio-rate input as well.

    beat

    vibrato rate, that is the speed of wobble in Hertz. Note that if this is set to a too low value, you may never get vibrato back, since this input is only checked at the end of a cycle.

    depth

    amount of vibrato frequency deviation around the fundamental, as a proportion of the fundamental.

    delay

    delay in seconds before vibrato is established. (init-time only)

    onset

    transition time in seconds from no vibrato to full vibrato after the initial delay time. (init-time only)

    beatVar

    random (noise) variation on the beat parameter, expressed as a proportion of beat . It can change once per cycle of vibrato.

    depthVar

    random (noise) variation on the depth of modulation, expressed as a proportion of depth . It can change once per cycle of vibrato. The noise affects independently the up and the down part of vibrato shape within a cycle.

    iphase

    initial phase of vibrato modulation, allowing starting above or below the fundamental rather than on it. (init-time only)

Value Members

  1. final def !=(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  2. final def ##: Int
    Definition Classes
    AnyRef → Any
  3. final def ==(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  4. final def asInstanceOf[T0]: T0
    Definition Classes
    Any
  5. val beat: GE
  6. val beatVar: GE
  7. def clone(): AnyRef
    Attributes
    protected[lang]
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.CloneNotSupportedException]) @native() @HotSpotIntrinsicCandidate()
  8. val delay: GE
  9. val depth: GE
  10. val depthVar: GE
  11. final def eq(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  12. val freq: GE
  13. final def getClass(): Class[_ <: AnyRef]
    Definition Classes
    AnyRef → Any
    Annotations
    @native() @HotSpotIntrinsicCandidate()
  14. lazy val hashCode: Int
    Definition Classes
    UGenSource → AnyRef → Any
  15. val iphase: GE
  16. final def isInstanceOf[T0]: Boolean
    Definition Classes
    Any
  17. def makeUGen(_args: Vec[UGenIn]): UGenInLike
    Attributes
    protected
    Definition Classes
    VibratoUGenSource
  18. def makeUGens: UGenInLike

    Abstract method which must be implemented by creating the actual UGens during expansion.

    Abstract method which must be implemented by creating the actual UGens during expansion. This method is at most called once during graph expansion

    returns

    the expanded object (depending on the type parameter U)

    Attributes
    protected
    Definition Classes
    VibratoExpander
  19. final def name: String
    Definition Classes
    UGenSource
  20. final def ne(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  21. final def notify(): Unit
    Definition Classes
    AnyRef
    Annotations
    @native() @HotSpotIntrinsicCandidate()
  22. final def notifyAll(): Unit
    Definition Classes
    AnyRef
    Annotations
    @native() @HotSpotIntrinsicCandidate()
  23. val onset: GE
  24. def productElementNames: Iterator[String]
    Definition Classes
    Product
  25. val rate: Rate
    Definition Classes
    VibratoGE
  26. final def synchronized[T0](arg0: => T0): T0
    Definition Classes
    AnyRef
  27. final def wait(arg0: Long, arg1: Int): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException])
  28. final def wait(arg0: Long): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException]) @native()
  29. final def wait(): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException])

Deprecated Value Members

  1. def finalize(): Unit
    Attributes
    protected[lang]
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.Throwable]) @Deprecated
    Deprecated

Inherited from Serializable

Inherited from SingleOut

Inherited from SomeOut

Inherited from GE.Lazy

Inherited from GE

Inherited from UGenSource[UGenInLike]

Inherited from Expander[UGenInLike]

Inherited from Lazy

Inherited from Product

Inherited from Equals

Inherited from AnyRef

Inherited from Any

Ungrouped